PRODUCTS

NEWS AND INFORMATION

Industry informationHome>Industry information > Safety Operating Procedures for Gas Generator Set

Safety Operating Procedures for Gas Generator Set

Time：2026-01-31 15:29:18 Edit：HuaQuan Traffic Index：30

A gas generator set is a device that uses combustible gas as fuel, converts chemical energy into mechanical energy through an internal combustion engine or gas turbine, and then generates electrical energy through a generator.

I. Characteristics of Gas Generator Sets
Gas generator sets are efficient, clean, and flexible power generation equipment. They use natural gas and other fuels, start quickly, have strong adjustability, and are an ideal choice for grid peak shaving and distributed energy.

II. Huaquan Power is a professional gas generator set manufacturer in China
Huaquan Power Company was established in 2010. The company's industries cover multiple fields, including power generation equipment, new energy storage devices, high and low voltage complete sets of equipment, and power engineering. It has also developed three major brands: "HQ-POWER," "HUAQUAN," and "Huaquan." Currently, the company has grown into a strong global brand in the power industry, with cumulative global sales exceeding 1 million units.

III. Advantages of Gas Generator Sets
1. Clean: Gas Generator Sets have low pollutant emissions and serve as a clean energy alternative to coal power.
2. Efficient: High combined cycle efficiency, with even higher overall utilization in cogeneration.
3. Flexible: Gas Generator Sets start quickly and have strong load regulation capabilities, making them the first choice for grid peak shaving.
4. Versatile: Strong fuel adaptability and wide application scenarios.
5. Space-saving: Gas Generator Sets have a simple system, occupy a small area, and have a short construction period.

IV. Safety operation regulations for gas generator sets
1. Start the operation
Personal protection: Wear protective equipment such as insulated gloves and insulated shoes.
Final confirmation: remove the debris on the gas generator set, and confirm that the gas pressure, flow rate and temperature are normal again.
Perform starting: Start the gas generator set according to the operation manual procedure. During the start-up process, it is strictly forbidden to operate any safety device and closely observe the operating status.
2. Operation monitoring
Parameter monitoring: Continuously monitor the voltage, frequency, oil pressure, water temperature, cylinder temperature, exhaust temperature and other parameters of the gas generator set to ensure that it is within the normal range.
Inspection: Conduct regular inspections to pay attention to abnormal noises, vibrations, temperature rises or leaks, especially gas pipelines.
Recording and ventilation: record the operating parameters of the gas generator set every 1-2 hours; Always keep the machine room well ventilated to prevent the accumulation of combustible gases.
3. Stop operation
Normal shutdown: Before shutdown, the load should be unloaded and the unit speed and gas volume should be gradually reduced. When the power drops to a low value, the valve is opened, and the gas generator set is initially cooled down after running at the rated speed for a few minutes, and then switches to idle operation. When the water temperature and oil temperature drop below 60°C, close the manual gas valve and automatically stop the gas generator set when the gas is exhausted.
Emergency shutdown: If there is any abnormality in operation, the machine must be stopped immediately, the gas transmission must be cut off, and all equipment switches must be turned off. Attempts to reboot are strictly prohibited until the cause has been identified.

V. Questions and answers on the relevant knowledge of gas generator sets
1. What parameters are key to monitor in the operation of gas generator sets?
It is necessary to continuously monitor voltage, frequency, oil pressure, water temperature, cylinder temperature/exhaust temperature, gas pressure, etc. to ensure that they are within the normal range, and regularly inspect the records.
2. What important role does gas generator sets play in the power grid?
Because of its rapid start-up and strong adjustment ability, it is an ideal choice for grid peak shaving, which can quickly respond to fluctuations in power demand and ensure grid stability.
3. What is cogeneration? How is the gas generator set realized? Cogeneration refers to the simultaneous generation and heating of electricity. While generating electricity, the gas generator set can recover the exhaust gas of the engine and the waste heat of the cylinder liner water for heating or cooling, greatly improving the comprehensive energy utilization rate.

V. Application fields of gas generator sets
1. Power peak shaving: make up for the intermittency of wind power and photovoltaics and ensure the stability of the power grid.
2. Distributed energy: gas generator sets provide primary power or backup power for industrial parks, data centers, hospitals, commercial complexes, etc., to achieve nearby power supply.
3. Cogeneration: While generating electricity, gas generator sets recover waste heat for heating, cooling or industrial steam, greatly improving comprehensive energy efficiency.
4. Industrial self-provided power supply: provide reliable power for high-energy-consuming enterprises such as oil and gas exploitation, chemical industry, metallurgy, etc., and use associated gas and exhaust gas in the production process to generate electricity.
5. Environmental protection and resource utilization: Gas generator sets use landfill gas, sewage treatment plant biogas, coal mine gas, etc. to generate electricity to realize waste recycling.
‌
Gas generator sets are efficient, clean, and flexible, and their applications have expanded from traditional power stations to several key industries. Users should choose the appropriate gas generator set according to their specific work needs.
More information about Gas Generator Set: http://www.fadianjidl.com/