The stable operation of petroleum system generator set used in petroleum systems as key backup or main power sources is crucial for oil production, storage, and transportation. To ensure the long-term reliable operation of the equipment, it is necessary to follow a scientific maintenance plan, with a focus on the maintenance of the fuel system, mechanical components, and electrical system.
1. Maintenance of generator fuel system for of petroleum system generator set
The generators used in the petroleum system usually use diesel as fuel, and the quality of the fuel directly affects the performance of the equipment. Attention should be paid during maintenance:
Regularly check the fuel quality to prevent moisture, impurities, or microbial contamination, and avoid clogging the fuel injectors or damaging the high-pressure pump.
Clean or replace the fuel filter to ensure effective fuel filtration and reduce engine wear.
Check the fuel pipeline and sealing to prevent leaks and avoid safety hazards.
2. Maintenance of petroleum system generator set and engines
The engine is the core component of the generator used in the petroleum system and requires regular inspection of the following:
Replace the engine oil and filter to ensure the normal operation of the lubrication system and reduce friction losses.
Cooling system inspection, including coolant level, water pump, and radiator, to prevent engine overheating.
Clean or replace the air filter to prevent dust from entering the cylinder and affecting combustion efficiency.
3. Maintenance of petroleum system generator set
The electrical components of generators used in the petroleum system must be kept stable to prevent malfunctions caused by moisture or corrosion
Check the battery status to ensure sufficient electrolyte and no corrosion on the terminals, ensuring reliable start-up.
Test the Automatic Switching Device (ATS) to verify its ability to switch to generator power supply in a timely manner during a power outage.
Check the wiring terminals and insulation performance to prevent short circuits or poor contacts.
4. Operation testing and recording of of petroleum system generator set
Regular no-load and load tests are conducted to verify the response capability of generators used in petroleum systems in the event of sudden power outages.
Record operating parameters (such as voltage, frequency, oil pressure, etc.), analyze trends, and identify potential issues in advance.
5. Environmental adaptability maintenance
Oil system generators often operate in harsh environments such as high temperature, high humidity, and corrosive gases, and additional attention should be paid to:
Moisture and corrosion prevention treatment, regular inspection of engine compartment sealing, and the use of rust inhibitors if necessary.
Maintain good ventilation to avoid overheating of equipment due to poor heat dissipation.
The maintenance of for of petroleum system generator set needs to be systematic and standardized, with a focus on fuel management, engine maintenance, electrical system inspection, and environmental adaptability. By regular maintenance and testing, the failure rate can be significantly reduced, ensuring stable power support at critical moments.
More information about petroleum system generator set：http://www.fadianjidl.com/
